Ribbon with Lundahl 3322A

[ABJensen]

Ribbon with Lundahl LL3322A transformer. 150cm lomg 2.3 cm wide. 4 my alu with glued paper back. Soft foam at the end. "Glued" with small magnets so that the ribbon can be adjusted.
Measured at 1 meter.

 

[WrineX]

that looks rather good ! although try not to use so strong smoothing 🙂 you used some serious magnets there ?

 

[ABJensen]

1/24 octave smooting. It´s measured with out any baffel.