Revox F36

Status
Not open for further replies.
Jump to Latest
hifisucks

hifisucks

Member
Joined 2009
#1
Hello, my F36 stopped working after a burning resistor and 2 blown caps.
First the rewind didnt work and then a bright light flickered on the left side...
I opened the machine and unfortunatly can't read the value of the resistor.
Here some fotos:
http://my.funpic.de/show-photo/711923-PIC.jpg
http://my.funpic.de/show-photo/712241-PIC.jpg
http://my.funpic.de/show-photo/711925-PIC.jpg
http://my.funpic.de/show-photo/712243-PIC.jpg

Does someone know the value of this resistor? The print is now burned off...
The curcuit doesnt show this resistor...
Greetings, Christoph
 
#2
The transport in the F36 I believe is very similar to the early G36 MKI transport, might want to look for a schematic of that unit. I have a G36 MKIII which is significantly different so that's no help.

It might be 100 ohms or so if it is the tensioning power resistor, the fact that it does not rewind indicates an additional problem.. You might want to check the phase shift capacitor and motor windings for shorts.
 
Status
Not open for further replies.
Top Bottom