As, AP2 started , at the end, the revolutionary amp will cure the cancer if you connect the patient at the output and shock it with 40Vpp sine wave at 20KHz. 😀
Member
Joined 2009
Paid Member
I have invented never seen before amplifier topologies quite a bit over the past few years. I've yet to see one actually turn out to be unique 😀
Input transformer + floating current buffer ? - the list goes on - only so many ways to use a transformer.
To make this more fun we should start guessing what it is 😀
Input transformer + floating current buffer ? - the list goes on - only so many ways to use a transformer.
To make this more fun we should start guessing what it is 😀
Hi,
Yawn ....... Its the usual I've built the best thing since
bread, I wan't to brag about, slag off everything else,
but can't give details due to patents, blah-de-blah.
It will never see the light of day, they never do.
rgds, sreten.
Yawn ....... Its the usual I've built the best thing since
bread, I wan't to brag about, slag off everything else,
but can't give details due to patents, blah-de-blah.
It will never see the light of day, they never do.
rgds, sreten.
"Revolution in A-B Class Amplifiers"
Would it be better if we say it Evolution, not Revolution? It's bugging in my ears
I see war in my mind not a progresive development.
Would it be better if we say it Evolution, not Revolution? It's bugging in my ears
I see war in my mind not a progresive development.
hi,
Instead of showing interest, curiosity and other normal behaviors, you're having fun with my item. for me, nothing changes.
The version I will make myself available for amateurs, use the Lundahl transformer.
to be understood free assembly, excluding commercial.
I understand how hard it is to accept, especially for some who have built their life on the class AB.
I have respect for all those who work like me, 15 hours a day.
Not tolerate the incapable, whether those that do not have a scheme under the eyes, are not able to develop a new circuit. then modify and copy, copy and modify, what we have today?
With some of my articles, many things have changed, and you hate me?
wait the module, then diagram,instead of cip..cip..coccodè 🙂
Instead of showing interest, curiosity and other normal behaviors, you're having fun with my item. for me, nothing changes.
The version I will make myself available for amateurs, use the Lundahl transformer.
to be understood free assembly, excluding commercial.
I understand how hard it is to accept, especially for some who have built their life on the class AB.
I have respect for all those who work like me, 15 hours a day.
Not tolerate the incapable, whether those that do not have a scheme under the eyes, are not able to develop a new circuit. then modify and copy, copy and modify, what we have today?
With some of my articles, many things have changed, and you hate me?
wait the module, then diagram,instead of cip..cip..coccodè 🙂
THAT's a fantastic achievement ! Congratulations.
This surely puts you far ahead of most mortal humans. This should blow everyone's mind. So far we've been hearing many scientists saying that the more they find out about the brain , they realise that they know very much less than they had assumed !
This should also mean that we would now fully understand things like 'the soul' , telepathy , teleportation and the myriad other topics connected with life in multiple dimensions and their inter-connectivity.
Or are you only talking about designing amplifiers ? 😉
Just kidding.😀
But yes , you have kindled a lot of excitement by starting this thread. You'd better deliver soon ! Otherwise I guess you will be converted into minced meat rather fast ! 😀
but you haven't
facts are missing
it's been said many times that there may not be much new to find in solid state design
so if you really have found someting it ought to have interest
but not knowing everything that have been done out there could mean you may have to realise it have been done before
AP2. Patent applications in EU and US are published so that interested parties can object, debate, add to , and subtract from them. You may be able to release the application number if your legal counsel agrees. This diyAudio Forum will be a new avenue to challenge or critique it in a positive manner. But this collective feedback may need to be disclosed to the patent examiners.
By example, I visited www.uspto.gov and searched the patent application database using the term "audio power amplifier" in the Title. I got 26 hits. I'll sift through them later. One can similarly querry the granted patent database. A lot of new tech may be hashed in diyAudio Forum.
Interested in your new design. Someone who is in production stage of actual units, has applied for patents on their design, obviously has not designed a paper amp. Probably you have researched enough existing patents/designs to know if it is radically new or not.
I would have to take some issues with stating S/N not ''being measurable'' etc, or at least reserve a comment on that for a time if/when there is test measurement data released.
''Perfect'' linearity, phase and zero damping wouldn't necessarily result in great sounding amps... but that is a whole other topic.
I would have to take some issues with stating S/N not ''being measurable'' etc, or at least reserve a comment on that for a time if/when there is test measurement data released.
''Perfect'' linearity, phase and zero damping wouldn't necessarily result in great sounding amps... but that is a whole other topic.
One application is entitled Class AB-D audio power amplifier. No implication it can be is related to AP2 power amp. Just general info. I could not view the images; my compute's limitation.
Thanks to Antoinel for explanations , interest about my work and support thread.
Thanks also to others who show interest in research , without thinking about the problems of the business.
In the meantime I found out that the examination of the circuit has complications and can be accepted only in the completeness of the amplifier to be patented.
Basically I wanted to eliminate the cross- current modulation , and then is formed by two identical channels pure class type A.
now, if I close the entrance with simple transformer input (not as a driver mosfet ), the concept could be the evolution of the F6 Nelson Pass. ( also in this case , is a little more complex becouse i use multiple local fb, and two servo operated by a differential,etc.. considering keeping everything clean for 150Mhz power BW.
There is no doubt that an amplifier with this architecture , it is like an engine that flies to 20,000 rpm .
To this we must add something else to increase the efficiency 🙂
The project without transformer input is complex ( this right is already in production ) . ( we filed the patent for this ) .
Both version has the input is not referenced to gnd , and does not refer to a common point.
Each side is free to modulate the current without ballast .
excellent that allows the use of N channel FET . (without phase rotation in the gate of the mosfet)
Both play in multiple local FB + a NFB very low level .
Maybe you feel strange, but this work lasted seven months (between a job and the other),was not motivated as start, by business, but of course can have.
as promised, a version suitable for amateurs, will be freely available, I can offer only the PCB (4 layers). the commercial version uses 8 layers.
I honestly do not think I have done something wrong towards this forum.
Regards
Thanks also to others who show interest in research , without thinking about the problems of the business.
In the meantime I found out that the examination of the circuit has complications and can be accepted only in the completeness of the amplifier to be patented.
Basically I wanted to eliminate the cross- current modulation , and then is formed by two identical channels pure class type A.
now, if I close the entrance with simple transformer input (not as a driver mosfet ), the concept could be the evolution of the F6 Nelson Pass. ( also in this case , is a little more complex becouse i use multiple local fb, and two servo operated by a differential,etc.. considering keeping everything clean for 150Mhz power BW.
There is no doubt that an amplifier with this architecture , it is like an engine that flies to 20,000 rpm .
To this we must add something else to increase the efficiency 🙂
The project without transformer input is complex ( this right is already in production ) . ( we filed the patent for this ) .
Both version has the input is not referenced to gnd , and does not refer to a common point.
Each side is free to modulate the current without ballast .
excellent that allows the use of N channel FET . (without phase rotation in the gate of the mosfet)
Both play in multiple local FB + a NFB very low level .
Maybe you feel strange, but this work lasted seven months (between a job and the other),was not motivated as start, by business, but of course can have.
as promised, a version suitable for amateurs, will be freely available, I can offer only the PCB (4 layers). the commercial version uses 8 layers.
I honestly do not think I have done something wrong towards this forum.
Regards
- Status
- Not open for further replies.