Hi there,
I do not have any proper workshop tools and would like to have a simple mdf armboard made to fit a modded RB250 onto an Ariston RD11 E. The dimensions are 87mm diameter with 23mm hole, 10mm thick.
I would of course pay for materials and labour, as well as delivery via Paypal.
Thanks,
Andre from near Toronto
I do not have any proper workshop tools and would like to have a simple mdf armboard made to fit a modded RB250 onto an Ariston RD11 E. The dimensions are 87mm diameter with 23mm hole, 10mm thick.
I would of course pay for materials and labour, as well as delivery via Paypal.
Thanks,
Andre from near Toronto
Why dont you just go to a sign makers shop and have them cut you one out of 10mm thick acrylic in a colour of your choice.Ive done this a couple of times now for my Ariston and they look great and sound good.Cost me about $30AUS to get all the holes cut to size,polished and screw attaching holes countersunk.Better finish than the original piece of crap nylon.
- Status
- Not open for further replies.