I need to replace a CDM 4/11 laser module and have some
CDM 4/19 units. The chassis is a little different -- but
could I use the 4/19 to replace a 4/11?
Michael
CDM 4/19 units. The chassis is a little different -- but
could I use the 4/19 to replace a 4/11?
Michael
Hello Michael,
Since the lasers are similar, you have a pretty big chance of success.
Best regards,
Joris
Since the lasers are similar, you have a pretty big chance of success.
Best regards,
Joris
You can. The RAFOC (the laser and swingarm assembly) is identical. You just swap that from the CDM-4/19 chassis to the CDM-4/11 chassis. Make sure you do this at a static safe workstation. I have done this myself before with no problems at all.
Before you do though, are you sure that the CDM-4/11 is at fault? In my experience, the player itself is more likely to be the problem.
Before you do though, are you sure that the CDM-4/11 is at fault? In my experience, the player itself is more likely to be the problem.
- Status
- Not open for further replies.