Hello,
I picked up VinylPlay Record Player which is pretty much Rega Planar 1 + Rega Fono Mini A2D combined Unit. 24v AC power source is powering both motor and this phono board. Somehow motor spins fine but no sound output at all. No hum or hiss but dead silent.
I checked the test voltage points 11v+ and 22v+ and both test point indicate exact voltage. I also measured VOutL and VOutR point and both measured 11v+.
Can anyone guess what might be the issue? I attached photo just took for kind reference.
Any suggestion would be hugely appreciated.
Thank you.
I picked up VinylPlay Record Player which is pretty much Rega Planar 1 + Rega Fono Mini A2D combined Unit. 24v AC power source is powering both motor and this phono board. Somehow motor spins fine but no sound output at all. No hum or hiss but dead silent.
I checked the test voltage points 11v+ and 22v+ and both test point indicate exact voltage. I also measured VOutL and VOutR point and both measured 11v+.
Can anyone guess what might be the issue? I attached photo just took for kind reference.
Any suggestion would be hugely appreciated.
Thank you.
Attachments
Just checked if tonearm is okay so soldered wire direct onto RCA sockets and bypass Fono A2D phono circuit and it works so the problem is definitely on Fono A2D phono preamp circuit.