Rega Elicit Mk2 volume control issue

Jump to Latest
Andrew_Ko

Andrew_Ko

Member
Joined 2025
#1
Hi there. I have enjoyed a fine Rega Elicit mk2 amplifier for several years. However, recently I noticed that at a certain position of the volume control (or rather the LED track, as the knob has no fixed position) the sound from the left channel disappears, if I turn the control knob (or remote control) a few clicks clockwise the sound reappears, although it is slightly muffled. I checked different inputs, different sound sources - the problem does not disappear, the sound from the left channel disappears exactly in this position of the LEDs. I need your help.
 
#2
Perhaps a bad solder joint like in this thread?
M

Thread 'Rega Elicit MK2'

Hello,

I have a Rega Elicit mk2 and after some year of use it started having the problem of going silent after a hour of music play.

If I shutdown the amp and turn it back on after some time, the amp would play but again but not for long.



After hours of search on internet, I thinks it's due to the protection circuit.



For the beginning i would like to check the bias but i dont know the correct value and process for this amp.



Let me know if anyone if someone has the diagram or the adjustment procedure for this amplifier !



If you have already run to this problem with the same...
 
  • Like
Reactions: Andrew_Ko
You must log in or register to reply here.
Top Bottom