I don't take the Forums too seriously, As long as I behave myself, I can just enjoy things.
MONACOR: SPH-210
I have never heard this Monacor SPH-210 speaker in my life. But it looks OK. 20L box is about right for an 8" speaker. Frequency response looks tidy enough. Don't get too tangled up with bass response alone.
Not far from where you want to be. Keep the tweeters. Minor classics IMO.
MONACOR: SPH-210
I have never heard this Monacor SPH-210 speaker in my life. But it looks OK. 20L box is about right for an 8" speaker. Frequency response looks tidy enough. Don't get too tangled up with bass response alone.
Not far from where you want to be. Keep the tweeters. Minor classics IMO.
I think I asked you to measure the DC resistance of the tweeters. An important measurement when designing crossovers.
But the DC resistance of the woofers is neither here nor there.
But I prefer 8 ohms because most amplifiers are better with that.
TBH, the Monacor SP-202E is more the PA thing. I'd duck it here.
But the DC resistance of the woofers is neither here nor there.
But I prefer 8 ohms because most amplifiers are better with that.
TBH, the Monacor SP-202E is more the PA thing. I'd duck it here.
Well, I just borrowed a multimeter (I am away from home and I miss all my tools) and the tweeter lands around 4.4ohms, though I would expect it to be slightly lower excluding the multimeter cables' and contact resistance.
But, another fact emerged. It looks like the tweeter that was in the same box as the broken woofer is burned (I cant read any resistance). I would assume that this speaker was somehow abused in it's past and both the tweeter and the woofer died. So now I am in need of 2 tweeters as well that fit in the 60mm holes to pair with the SPH-210...
But, another fact emerged. It looks like the tweeter that was in the same box as the broken woofer is burned (I cant read any resistance). I would assume that this speaker was somehow abused in it's past and both the tweeter and the woofer died. So now I am in need of 2 tweeters as well that fit in the 60mm holes to pair with the SPH-210...
Don't despair!
I bought these old Wharfedale Linton puppies awhile back for 30 Euros:
Tweeters fried. 😱
But decent boxes. Full of possibility.
I think that Monacor SPH-210 woofer will do the business. And a Monacor HT-22/8 tweeter: MONACOR: HT-22/8.
Cheaper than buying some ready made stuff. 😎
I bought these old Wharfedale Linton puppies awhile back for 30 Euros:
Tweeters fried. 😱
But decent boxes. Full of possibility.
I think that Monacor SPH-210 woofer will do the business. And a Monacor HT-22/8 tweeter: MONACOR: HT-22/8.
Cheaper than buying some ready made stuff. 😎
Yes, I agree... And it's the diy pride that matters as well, not only the price 🙂
But thanks again for the help! I think I will go with those drivers! There is a local reseller also here, I'll go talk with them tomorrow and get a price 🙂
But thanks again for the help! I think I will go with those drivers! There is a local reseller also here, I'll go talk with them tomorrow and get a price 🙂
Go for it my friend.
Crossover like this. Might think of something slightly different on the bass filter. Because this is for a very high inductance paper woofer. But it will work.
Crossover like this. Might think of something slightly different on the bass filter. Because this is for a very high inductance paper woofer. But it will work.
A bit late to this but this may be of use, one of the online databases of Tandberg equipment - this one their loudspeakers
Tandberg-høyttalere
Tandberg-høyttalere