• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Ra on C3g and 6C45pi?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
artosalo

artosalo

Member
Joined 2010
You can easily calculate rp. It is mu/s.
In case of 6s45p-e, mu = 52 and s = 45 mA/V.

But remeber that the value of s depends strongly on the used Ia.
For example in case of triode connected C3g; when Ia = 4 mA, rp = 5 k-ohms.
The specified 2,3 k rp requires 17 mA anode current.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom