Quick slipping belt fix for CD player mechs

Status
Not open for further replies.
Seeing a lot of members are having problems getting belt replacements for their CD players here is a quick fix for that stretched (loose) slipping belt, this is not meant to fix perished dried out belts.

1: Remove the belt in question, clean the belt and don't forget the pulleys with Methylated Spirits (alcohol)

2: Boil the belt in boiling water for 10mins making sure it is NOT laying on the bottom of the pan.

3: Remove the belt and drop into a glass of ice water for 1 min.

And there you have it, one shrunk belt while not as good as buying a new one, will get you out of trouble.

Cheers George
 
Hi, Mr. George! I have such a problem with Sony Kss-272a the belt is too loose and the pickup is not lifted, while the tray gets in... for how much time can it help? 1 month -1 year? How it can be possible to replace the belt?
Best regards, Dmitriy
 
It works for as long as it works 🙂 Its an old trick of the repair trade.

If the belt is square in cross section it can be worth turning it "inside out" so the two unused faces run in the pulley grooves.
 
Status
Not open for further replies.