One of my speakers produces no sound, but when i put the slightest amount of pressure on the cone it plays clearly. I was just curious if anyone knew it this means the speakers is blown and if it is fixable or do I need to replace the speaker. thanks
it could be a bad solder connection or loose wire at the speakers terminal that could be re-soldered or it could be a blown voice coil that is loose inside the speaker and makes a connection when you push it in, if this is the case it is usually not fixable.
Good luck.
Good luck.Try touching the wires that run from the terminal to the cone of the speaker. You may have a broken connection at the terminal. That may be possible to repair.
- Status
- Not open for further replies.