Quad ESL 63 replacement parts idenfication

[Toronto]

Quad ESL 63 replacement parts identification

Wondering can some one tell which exact item at parts connection Error in Form!
I need to replace the two items in the photos.The number on the Cap is Alcap 220 MFU 50VNP...the other part Im not to sure the exact model to get since its stained,came off the board.

 

[Pyramid]

The resistor appears to be 5W 3.3 Ohms. PE apparently doesn't have a cross. Mouser PN 280-CR5-3.3-RC or 284-HS10-3.3F (10W aluminum housing WW).

The cap is 220µFd 50VDC non-polarized. Couldn't find a cross on PE either. Mouser PN 647-UES1H221MHM. Note this is a radial lead package not axial like your part (Mouser did not have an axial NP caps).

 

[esl 63]

If you have a tube amplifier with transformer output.
Truy just to replace the camp and resistor with a wire.
If you also have an active crossover and a subwoofer you will not miss the slight equalization you get from the R/C link.

Try with a wire!