QUAD 303 PSU fault

My Quad 303 won't switch on and I'm just checking I'm on the right track, checked dc at main caps and got nothing

Confirmed 230vac to transformer,

Disconnected transformer secondaries from bridge and got

46vac
7.5vac

Connected them back and disconnected vdc from bridge rectifier and got

On the vac 48v and 8.1v

on the vdc outputs on the bridge measures 2.5vdc on both

I'm leaning towards a faulty bridge rectifier?

Does this sound correct?
 

Attachments

  • Screenshot_20250420_103409_Adobe Acrobat.jpg
    Screenshot_20250420_103409_Adobe Acrobat.jpg
    106.8 KB · Views: 40
Last edited:
Ok seems to have resolved itself, reconnected all wires and.... just turned on?

Now new issue, cannot set the center voltage on one of the driver boards, R130 was open and couldn't get voltage over 25vdc now replaced and cannot get under 40vdc, voltage at R111 is 5vdc so incorrect there, where should I be
Screenshot_20250421_110418_Adobe Acrobat.jpg
looking?