Hey guys. I've been trying to get started programming the QCC5171 and since I'm locked out of the website's resources, finding info is pretty tough.
I've made a programming jig that people said has worked for other Qualcomm modules to directly connect it via USB, but nothing shows in device manager and there's no sound when I plug it in. Any ideas on what I might be missing? I have no access to the actual chip datasheet, so I have no clue outside of the module datasheet I was provided by the Chinese company I got it from. Even figuring out what program I should be starting with and how to set it up is proving difficult - but I think the answer to that one is Qualcomm MDE (seems to be where I would write the firmware, flash, and debug).
I've made a programming jig that people said has worked for other Qualcomm modules to directly connect it via USB, but nothing shows in device manager and there's no sound when I plug it in. Any ideas on what I might be missing? I have no access to the actual chip datasheet, so I have no clue outside of the module datasheet I was provided by the Chinese company I got it from. Even figuring out what program I should be starting with and how to set it up is proving difficult - but I think the answer to that one is Qualcomm MDE (seems to be where I would write the firmware, flash, and debug).
I had this pinout as well... my first attempt (where I just soldered the wires to the board itself), I tied pins 12 and 13 together. It didn't work either, however..
Have you been able to get yours to connect via USB?? If so, can you show me your setup?
