you'll hardly hear difference because of xconductance difference , because of closed loop operation ; you remember that Pumpie is SUSY .
you can hear difference using Toshibas instead 9510 , because they're less 'switch-like " parts , than IRFs ( transfer curve issue )
lower ones , in CCS position - you can use whatever you have - they're just CCS
you can hear difference using Toshibas instead 9510 , because they're less 'switch-like " parts , than IRFs ( transfer curve issue )
lower ones , in CCS position - you can use whatever you have - they're just CCS
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.