Thank you Manu for your kindly words.
Needed some hours and lightspeed volume control totally builded for a
serious sound report.
For now I listen a very refined and lively sound
Ciao,
Anto
Hallo ZM, i have few questions,
1. Will the pumpkin still working if i didn't match all transistor?
2. Can i use Elco for Output Caps?
3. I'll use lykkedk layout it easy to clone, do i have to worry about oscillation?
4. Will it drive F5 Turbo 😀 ?
Still trying to clone your layout
Thanks.
Didiet
1. Will the pumpkin still working if i didn't match all transistor?
2. Can i use Elco for Output Caps?
3. I'll use lykkedk layout it easy to clone, do i have to worry about oscillation?
4. Will it drive F5 Turbo 😀 ?
An externally hosted image should be here but it was not working when we last tested it.
Still trying to clone your layout
Thanks.
Didiet
Didiet78 :
I will warn you, that i back then only got one channel (High gainet) working... I had some serius trouble, with stabillity of the circuit, and some humming.
If it had something to do with the layout, i dont know... But "many" years after, i know now, that with a PCB design like DipTrace i could do a lot better.
You can easily design a 2 layer Pcb, and etch for your self... For me, the part of making PCB is half of the FUN making DiYAuDio ! - So i easily understand why you will make youre own PCB's...
Jesper.
I will warn you, that i back then only got one channel (High gainet) working... I had some serius trouble, with stabillity of the circuit, and some humming.
If it had something to do with the layout, i dont know... But "many" years after, i know now, that with a PCB design like DipTrace i could do a lot better.
You can easily design a 2 layer Pcb, and etch for your self... For me, the part of making PCB is half of the FUN making DiYAuDio ! - So i easily understand why you will make youre own PCB's...
Jesper.
Agree on this but I rather get the PCB from Zen Mod as a token for all the intratainment he provides on this forum.
Saiing that it will be nice to know
1) Is it possible to get them?
2) Is there any reason why I dont get replies to my warious requests?
I know I had special training on being an anoing pest and wont take any offence if this is the case.
Just let me know please so I can stop wasting space on this tread
Bsab
I sent you a reply to your last e-mail ?!?
anyway - I'll resend as soon I get home today
I sent you a reply to your last e-mail ?!?
anyway - I'll resend as soon I get home today
Tanks Zen
did not get any.
And sorry shuld have put a few smileys on previous post.
Mee bad.
Just need same spatcha been working Nights again
did not get any.
And sorry shuld have put a few smileys on previous post.
Mee bad.
Just need same spatcha been working Nights again
Thanks for warning. I don't want end up like Katieandad, got oscillation problem and still unsolved, maybe the new owner of katieandad's pumpkin can solve the problem.
For making PCB, i'm using Eagle Cadsoft, still need alot to learn. Copying good layout really helpfull for learning.
Thanks again for warning.
Didiet
NoProb...
Actually i get it working, but back then i got some serious problem, as i describet before, with unstability and like... I also have the problem, with DC -squeezzing on input, which i bellive was solved later, when other reported in the same problem... Still unsure if that had something to do with my problems.
Well the Pumkin was playing for a month or two, dispite thoose problem, but looking at a oscilloscope, 1. channel was very wrong. - Again it could be other problems, besides PCB layout. -Also i would like to say, that my PSU was a mockup ala' BoSoZ zener / mosfet regulated model... so it was not ideal either... Well i have had a lot of fun anyway with this *Pumpkin... and still proud beeing the first "prototype", besides ZenMods own ofcause...
ZenMod ? - Do you actually still have theese pcb's for shunty + pumpkin ???
Jesper.
Actually i get it working, but back then i got some serious problem, as i describet before, with unstability and like... I also have the problem, with DC -squeezzing on input, which i bellive was solved later, when other reported in the same problem... Still unsure if that had something to do with my problems.
Well the Pumkin was playing for a month or two, dispite thoose problem, but looking at a oscilloscope, 1. channel was very wrong. - Again it could be other problems, besides PCB layout. -Also i would like to say, that my PSU was a mockup ala' BoSoZ zener / mosfet regulated model... so it was not ideal either... Well i have had a lot of fun anyway with this *Pumpkin... and still proud beeing the first "prototype", besides ZenMods own ofcause...
ZenMod ? - Do you actually still have theese pcb's for shunty + pumpkin ???
Jesper.
sorry
sent few mins ago , as soon I sit by my PC to do some typing tonight
I'm sort of high last 24 hrs - I have funny flu without temperature and I feel funny even without any meds
sent few mins ago , as soon I sit by my PC to do some typing tonight
I'm sort of high last 24 hrs - I have funny flu without temperature and I feel funny even without any meds
So, problems could arise from PCB Layout, component selections, PSU.
Ps: ZM, sorry for cloning your design
An externally hosted image should be here but it was not working when we last tested it.
There you go, point proven.
http://www.diyaudio.com/forums/club...-festival-audio-happening-49.html#post2851300
sorry
sent few mins ago , as soon I sit by my PC to do some typing tonight
I'm sort of high last 24 hrs - I have funny flu without temperature and I feel funny even without any meds
Tanks got it and I am eager to folow up will keep that discussion on Email.
Still to be said in public You are kind and upright bloke
😀Thats why you feel funny you need the meds
Meds make you be funny and forghet the flu.
Old grand ma remedy
Thinly slice same carots and cover with loads of shugar let it rest in fridge
and later drink Juice
Work alla time
Forget it, In my opinion, what Katieandad did here was just plain nasty trolling ...
And his problem is not the Pkin ...
PCB layouting is not trivial, as lykkedk stated.
Most of us have perfectly working Pumpkins so we know that ZM PCBs are well layouted and working... I would go for it ...
And if something goes wrong during building you will get assistance here
My 2 cents
Manu
Paprara rara rara (Angels trumpets and devil trombones)
Gues what?
I got my Pumpkin and Shunty boards from vgeorge which I would like to tank here.
Realy preaty things they are I have been waiting so long that I feel sorry to put my soldering Iron on those biuties.
Gues what?
I got my Pumpkin and Shunty boards from vgeorge which I would like to tank here.
Realy preaty things they are I have been waiting so long that I feel sorry to put my soldering Iron on those biuties.
OK I will try to wrap up warm and get started
Grappa is big no no as I will still have to go to work for next couple of days.
I was wondering if it would be possible to get a guide to comon faults with the circuit boards (there is always same)
I was thinking about running a "MEGA" between traks before starting to solder the components.
Help preaty please
Grappa is big no no as I will still have to go to work for next couple of days.
I was wondering if it would be possible to get a guide to comon faults with the circuit boards (there is always same)
I was thinking about running a "MEGA" between traks before starting to solder the components.
Help preaty please
Tanks for that it is sometink I can cek in the warmth of my PC room.
Or even beter tonight at work between break downs
Buzzer nah 250 V 500 V mega like I use to test motor vindings 😀
Or even beter tonight at work between break downs
Buzzer nah 250 V 500 V mega like I use to test motor vindings 😀
And another daft question
OR a question that has been ansvered a gazilion times.
Traffos?
I have been looking around for trafos and standard stuff with small VA rating does came with a limited range of output voltages .
What are the reccomended minimum and maximum reccomended secondary voltages and VA ratings?
Help please Farnell list 160VA vith voltages of 30-30 the next oe is 55 - 55
I am prety shure I have seen somwhere that recomended voltages shuld be 42 - 42
For smaler VA ratings choice is even smaler.
I would if possible stick with UK manufacturer as Postagge is a killer.
Amplimo got same beter choice so most probably I will have to go there
OR a question that has been ansvered a gazilion times.
Traffos?
I have been looking around for trafos and standard stuff with small VA rating does came with a limited range of output voltages .
What are the reccomended minimum and maximum reccomended secondary voltages and VA ratings?
Help please Farnell list 160VA vith voltages of 30-30 the next oe is 55 - 55
I am prety shure I have seen somwhere that recomended voltages shuld be 42 - 42
For smaler VA ratings choice is even smaler.
I would if possible stick with UK manufacturer as Postagge is a killer.
Amplimo got same beter choice so most probably I will have to go there
Last edited: