Babowana said:Real Japanese quality products show very sharp and clean letter edges.
![]()
Babo
how many you want?
just tell , and I'm going in my garage to make them for you ...........

anyway - you count on fact that Jacco is somewhat capable to test that drek , before showing nude piccies ?
don't mess with him , ezpezially 'couse you play dumb every time when he literally asked you what he can send to you ........
old farts........... just polluting perfectly organized thread ........
now I'm gonnnnnna report ya both to main Beard beared Wackoo 🙂captain: )
Babowana said:very sharp and clean letter edges.
Bah-bwana,
it's the light, the dig.cam. and the byte size limitation that's to blame for most of the difference. (plus me is very sheety camera man)
My experience with a lot of Japanese device types is that the quality of the printing varies greatly.
(some of the devices on this piccy are probably older than you will still have teeth, under a magnafying glass the printing looks much the same + all measure as jfets.)
Sony Cybershout=>
jacco vermeulen said:it's the light, the dig.cam. and the byte size limitation that's to blame for most of the difference. (plus me is very sheety camera man)
Understood.
I'm very sensitive not to see any fake as I was cheated more than once.
Sometime, I feel that I should have installed the automatic vapor pressure
relief valve on the top of my boiling head.

Pumpkin and Shunty DIY
Another DIY-er inside the Pumpkin builder team 😀 .
Pumpkins and Shunties are just started being populated with elements...so far, so good...

Another DIY-er inside the Pumpkin builder team 😀 .
Pumpkins and Shunties are just started being populated with elements...so far, so good...

Re: Pumpkin and Shunty DIY
my Franco-Ostrich-Rhesus Manu friend is also soldering today ;
but - his better and smarter half is ....... smarter ; what else ?

spavleski said:Another DIY-er inside the Pumpkin builder team 😀 .
Pumpkins and Shunties are just started being populated with elements...so far, so good...
![]()
my Franco-Ostrich-Rhesus Manu friend is also soldering today ;
but - his better and smarter half is ....... smarter ; what else ?

Oh dear, i just barely survived a Danish sunday brunch and he's starting on apple pie.
What's this thread about anyway ?
What's this thread about anyway ?
jacco vermeulen said:What's this thread about anyway ?
About Pumpkin, but painted blue . . .

UPDATED COOK BOOK
quoting my friend spavleski again .........
anyway : lookie lookie here :
http://czsr_bac.on.neobee.net/The Pumpkin & Shunty.pdf
corrected few mistakes on schematic , also implemented "How Pumpkin works" and "How Shunty works " babbbblings
spavleski said:Looking into the Shunty's schematic (http://www.diyaudio.com/forums/showthread.php?postid=1335499#post1335499), there are different values for C9 and C9A, as well as for C10 and C10A.
![]()
It's obvious that should be the same in pair and according to BOM, should be like this:
C9, C9A = 10uF
C10, C10A = 100uF
Correct?
quoting my friend spavleski again .........
anyway : lookie lookie here :
http://czsr_bac.on.neobee.net/The Pumpkin & Shunty.pdf
corrected few mistakes on schematic , also implemented "How Pumpkin works" and "How Shunty works " babbbblings
Re: UPDATED COOK BOOK
Thx it looks like you've inverted p. 13 and 14?
(only to show with which attention I read your paper...)

Zen Mod said:anyway : lookie lookie here :
http://czsr_bac.on.neobee.net/The Pumpkin & Shunty.pdf
corrected few mistakes on schematic , also implemented "How Pumpkin works" and "How Shunty works " babbbblings [/B]
Thx it looks like you've inverted p. 13 and 14?
(only to show with which attention I read your paper...)

Re: UPDATED COOK BOOK
I printed the "incorrect" version yesterday! Copy-pasted babbliing from the forum, printed....

Zen Mod said:
corrected few mistakes on schematic , also implemented "How Pumpkin works" and "How Shunty works " babbbblings
I printed the "incorrect" version yesterday! Copy-pasted babbliing from the forum, printed....


Re: Re: UPDATED COOK BOOK
goin' to check that .....
sorry Vix!
Manu said:
Thx it looks like you've inverted p. 13 and 14?
(only to show with which attention I read your paper...)
![]()
goin' to check that .....
sorry Vix!
Re: Re: Re: UPDATED COOK BOOK
updated , uploaded
tnx manu..........
another Kuvar is good ?
Manu said:
Thx it looks like you've inverted p. 13 and 14?
(only to show with which attention I read your paper...)
![]()
Zen Mod said:
goin' to check that .....
sorry Vix!
updated , uploaded
tnx manu..........
another Kuvar is good ?
Re: Re: Re: Re: UPDATED COOK BOOK
My precious plan allready some Serbian délicatesse....
Gracie for Kuvar
BTW the apple pie WAS very good

Zen Mod said:another Kuvar is good ?
My precious plan allready some Serbian délicatesse....
Gracie for Kuvar
BTW the apple pie WAS very good

Re: Re: Re: UPDATED COOK BOOK
😉 Thanks for writing and uploading all that
stuff. Looks like one of Papa's manuals 😎
Zen Mod said:
goin' to check that .....
sorry Vix!
😉 Thanks for writing and uploading all that

Re: Re: Re: Re: UPDATED COOK BOOK
now I'm blushing ............
....... if you meant that as compliment
hehe - I hope that there is less mistakes than as usuall in Papa's manuals ......


Vix said:
😉 Thanks for writing and uploading all thatstuff. Looks like one of Papa's manuals 😎
now I'm blushing ............

hehe - I hope that there is less mistakes than as usuall in Papa's manuals ......


Yes, that's a compliment. 😎
I didn't read it carefully enough to spot any mistakes, but I have noticed the bird drawing! 😉
Vix
I didn't read it carefully enough to spot any mistakes, but I have noticed the bird drawing! 😉
Vix
Manu said:If they are not neat and lovely, I don't know what is.
I chose wima caps because of the color![]()
whoa!
MKP4 - 10uF/250V ......
ya didn' found anything smaller ?
where you'll put heatsinks ?

just in case - if you don't choose plain sheet of Al , heatsinks can be :
Fischer
SK81-50 SA
SK75-50
Austerlitz
KS100.3-50
KS32.1-50E
I almost forgot to say :
Ugly!

edit:
what's ugly greenie right from Pumpies ?

- Home
- Amplifiers
- Pass Labs
- Pumpkin preamp - ordered by Steen , official making thread