PSW-D110 C6 cap

[metaldrumer]

hi, i just bought a PSW-D110, on a garage sale, and it's ok, it works, but, after a little research, i found that it´s very usual that the c6 cap blows because of the value, i already have the schematics, but in my town i can´t find the exact replacements for this one, tha replacements are:

Number Original Value Replacement Value

C6 10uF 50v 10uF 100v
C24 100nF 50v =
R46 47 ohms
5% 1/4w =
R23 20K 0.25W
1% 20k
1/2W


but, the thing is that i have only found 10uF 50v bipolar (nichicon), and 10uF 100v polarized (JG) for the C6, and the R23 i´ve only found 22K 1/2W +/-5%

do i need the keep searching for the exact replacements? or could i try with the 22K on the R23 and 10uF 50v on the C6?

thanks!

 

[metaldrumer]

so, i´ve been soldering the replacements i found, but i´m not wuite shure if i should put the resistor of 22k ohms and the 10uF 50v, it will blow if i only use half of the volume?