Hi all,
I've looked for two substitute for the Psu caps in my Threshold 400A. I've bought two Rifa 22,000uF/100V but they are too high for the trafo wires...
Any suggestion about two caps in the right size? It would be approx 60-65 mm diameter and 80-85 mm high ...
Cheers 😎
I've looked for two substitute for the Psu caps in my Threshold 400A. I've bought two Rifa 22,000uF/100V but they are too high for the trafo wires...
Any suggestion about two caps in the right size? It would be approx 60-65 mm diameter and 80-85 mm high ...
Cheers 😎
My suggestion would be to head over to Digikey, and do a search and then read through the data sheets that are linked there. There's a million of them, but they do note the dimensions of every cap.
-j
-j
- Status
- Not open for further replies.