The shafts on some of the pots in my Princeton 112+ have become so loose within the body of the pot that they rotate themselves with vibration from the amp. Not a good thing to have your vol pot go to zero during a solo! Other than replacing the pots, is there anyway to tighten up the body to prevent this?
Thanks.
Thanks.
Idealy replace the pots or inject a small amount of Kilopoise friction grease. Available from Farnel, Mouser and all good engineering suppliers. Not too thickly.
http://www.farnell.com/datasheets/494930.pdf
http://www.farnell.com/datasheets/494930.pdf
- Status
- Not open for further replies.