Can someone link me to what one is supposed to plug into those 3pin connectors? (eg red one on TPA3116D2 2 0 Stereo Sound Dual Channel HiFi Large Power Digital Amplifier | eBay)
I bought one amp with just a connector, another with a wire that I had to solder. This is getting old. Is there a source of premade cables for this? Just need a 3.5mm or composite input
I bought one amp with just a connector, another with a wire that I had to solder. This is getting old. Is there a source of premade cables for this? Just need a 3.5mm or composite input
Get a dozen while you are at it the next time you order an amp from YJ. $0.40ea
http://www.yuan-jing.com/shielded-audio-cable-jst-xh-2-54-3p-awg28
http://www.yuan-jing.com/shielded-audio-cable-jst-xh-2-54-3p-awg28
Last edited:
Make sure which pin-pitch is used. The cables that XRK linked (XH) are 2.54mm, while the common audio input uses 2.0mm (PH).
I thought standard pitch for header pins was 0.100 inch or 2.54mm. The ones I linked are the ones YJ uses for their boards which I assume are 2.54mm pitch. The YBDZ uses 2.54mm pitch. However, the SMAKN uses 2.0mm. So you just have to check.
Last edited:
I bought the 3 pin 2.00mm housings and terminals from DigiKey and have been making my own. However, it would be nice to find a source for the premade 2.00mm cables.
I sent an email to YJ a couple of hours ago to see if they have them available. I will post their answer if I get a reply.
I sent an email to YJ a couple of hours ago to see if they have them available. I will post their answer if I get a reply.
I use the YJ ones and I also bought some of these so I can make my own--2.54mm though.
I don't see anything similar for 2.0mm headers.
link to the 2.54:
20pcs 3 Pin Connector Kit 3 Pin Connector Lead Header 2 54mm XH 3P Kit | eBay
I don't see anything similar for 2.0mm headers.
link to the 2.54:
20pcs 3 Pin Connector Kit 3 Pin Connector Lead Header 2 54mm XH 3P Kit | eBay
- Status
- Not open for further replies.
- Home
- Amplifiers
- Class D
- premade 3pin stereo in cable