I have this PCB schematic from JLM Audio. It is assembled and working on perforated board. I would like to make a PCB but don't know where to start. I downloaded express PCB but kind of discouraged. Any tips on designing and constructing PCB would be greatly appreciated.
Thanks
Thanks
Pcb
I so badly wanted to just ask someone to do this for me. I was intimidated by Eagle. I have spent quite a while reading and learning today. I have done the schematic for the +/-18V and attempted the board. I did the ERC test and fixed all of my mistakes however the ground doesn't show on the board. Could I possibly email you the .sch and .brd? I could really use some pointers.
Thanks
I so badly wanted to just ask someone to do this for me. I was intimidated by Eagle. I have spent quite a while reading and learning today. I have done the schematic for the +/-18V and attempted the board. I did the ERC test and fixed all of my mistakes however the ground doesn't show on the board. Could I possibly email you the .sch and .brd? I could really use some pointers.
Thanks
- Status
- Not open for further replies.