I have the following caps available, prefer to sell as a single lot:
Qty: 4 - Mepco/Electra, 37000 uF, -10 +75%, 75VDC, 95V surge, 85C
appear to be unused. 3" dia. x 6" high
Qty: 2 - Nippon Chemicon, 68000 uF, 35V, 95C
unused, with mounting hardware, 2 1/2" dia. x 3 3/4" high
Qty: 20 - Marcon 10000uF, 50V, 85C, wire leads (3)
unused, 1 1/4" dia x 2 3/8" high
The first $50 (plus shipping) takes all. I will throw in a hospital grade power cord (US plug and IEC socket) 3x18 ga.x about 10' long, and a set of 4, unused, red, solid copper binding posts (these things are BIG!). Check next couple posts in this thread for photos.
Paypal or USPO money order are preferred payment.
I will ship via USPO or UPS (your choice). Shipping weight is 14 lbs.
I_F
Qty: 4 - Mepco/Electra, 37000 uF, -10 +75%, 75VDC, 95V surge, 85C
appear to be unused. 3" dia. x 6" high
Qty: 2 - Nippon Chemicon, 68000 uF, 35V, 95C
unused, with mounting hardware, 2 1/2" dia. x 3 3/4" high
Qty: 20 - Marcon 10000uF, 50V, 85C, wire leads (3)
unused, 1 1/4" dia x 2 3/8" high
The first $50 (plus shipping) takes all. I will throw in a hospital grade power cord (US plug and IEC socket) 3x18 ga.x about 10' long, and a set of 4, unused, red, solid copper binding posts (these things are BIG!). Check next couple posts in this thread for photos.
Paypal or USPO money order are preferred payment.
I will ship via USPO or UPS (your choice). Shipping weight is 14 lbs.
I_F
Wait, there's more!
Buy the caps and I'll throw in two (that's all I have left) of these heatsinks, raising the total shipping weight to 16 lbs.
These are unused, with plastic cover to protect fins in shipping. Base is solid copper, 1/4" thick x 2 1/2" x 3 1/2". Overall height is 2". There are 32 fins! These will coooool your gain-clown!
Thanks again!
I_F
Buy the caps and I'll throw in two (that's all I have left) of these heatsinks, raising the total shipping weight to 16 lbs.
These are unused, with plastic cover to protect fins in shipping. Base is solid copper, 1/4" thick x 2 1/2" x 3 1/2". Overall height is 2". There are 32 fins! These will coooool your gain-clown!
Thanks again!
I_F
Attachments
Still more!
I just dug out two more caps (no photo). Both are Mallory made. One is 6500 uF 50V 85C, the other is 12000 uF 25V 85C. These are identical sized cans with screw terminals. Appear to be unused, 2" dia x 3 3/4" high. They will be carefully packed in the box with the others....
I_F
I just dug out two more caps (no photo). Both are Mallory made. One is 6500 uF 50V 85C, the other is 12000 uF 25V 85C. These are identical sized cans with screw terminals. Appear to be unused, 2" dia x 3 3/4" high. They will be carefully packed in the box with the others....
I_F
will pick up your packaged deal. sent PM...
caps bigger than would use (since they often recommend many small trump 1 big) but can do some scrounge projects or good for some class A where monster capacitance in order.
caps bigger than would use (since they often recommend many small trump 1 big) but can do some scrounge projects or good for some class A where monster capacitance in order.
The caps have been sold.
I still have a few quarters, though...
$0.50 each plus shipping, as many as you want. I'll even give you a break on shipping- $5 for the first one, and an extra $0.25 for each thereafter.
I_F
I still have a few quarters, though...
$0.50 each plus shipping, as many as you want. I'll even give you a break on shipping- $5 for the first one, and an extra $0.25 for each thereafter.
I_F
You do know a penny is worth about $0.014 right now... zinc is through the roof!
I'm still thinking about the quarters... have to ask my wife.
I'm still thinking about the quarters... have to ask my wife.
When we went to decimal currency in 1966 in my part of the world, our 50c coins contained 50c worth of silver. Unfortunately there are not many specimens left 😉
- Status
- Not open for further replies.