Potentiometer HELP I'll look for hours and never find this.

ANYONE know where I can get a 20kohm pot like this? A close part number would be great.
 

Attachments

  • 15945636950867908035050756921114.jpg
    15945636950867908035050756921114.jpg
    477.6 KB · Views: 130
  • 15945637462237722833474802516942.jpg
    15945637462237722833474802516942.jpg
    411.6 KB · Views: 126
Perry the standoff are strange i made a 20k pot for a rockford work. I used 2 6 prong ic risers and cut them in half, to make 4 3pin turned them around to fit on the pins. and glued them together. soldered it in and presto. A working pot.

No other marking on the potentiometer other than shown in photo
 
Last edited:
I have found it but it seems it might not be the right one...😱

It is a C20k and a B20k in one, a combined volume and balance knob from an old Boss EQ I took apart for the smps power supply.

If it is any good to you send me your address by pm and I’ll pop it in the post.

Don’t know where you would get one I’m afraid, I think Cynically searching something like Aliexpress for “Bourne potentiometer” might turn up the owl source for Boss.
 

Attachments

  • 8C149362-0007-4EC8-896C-F3002ADC3B5B.jpeg
    8C149362-0007-4EC8-896C-F3002ADC3B5B.jpeg
    234 KB · Views: 67
  • 2BD5BCDE-2217-4087-85A4-34C4E29BA721.jpeg
    2BD5BCDE-2217-4087-85A4-34C4E29BA721.jpeg
    251.5 KB · Views: 54