Hi guys, I'm searching a amp to drive two 4Ohm 2W speakers.
It should be portable and i want to use AA-Batteries to power it.
The Amp should run with 6-9V!
can someone recommend a kit or has such a amp to sell?
(i also have the a Zhaolu 2.5 headphone amp here (the small cheap one), can i use this with some modifications?)
It should be portable and i want to use AA-Batteries to power it.
The Amp should run with 6-9V!
can someone recommend a kit or has such a amp to sell?
(i also have the a Zhaolu 2.5 headphone amp here (the small cheap one), can i use this with some modifications?)
thx, that seems to be a good shop.
this amp looks perfect:
http://store.qkits.com/moreinfo.cfm/QK143
but $32-$42 shipping costs to Europe
this amp looks perfect:
http://store.qkits.com/moreinfo.cfm/QK143
but $32-$42 shipping costs to Europe
Hi,
If you can make your own amplifier, you can use LM380N-18 for ~1 W power, LM380N-14 for ~2 W power. Construction is very easy as you require only a coupling capacitor and a decoupling capacitor on the Vcc pin.
If you can make your own amplifier, you can use LM380N-18 for ~1 W power, LM380N-14 for ~2 W power. Construction is very easy as you require only a coupling capacitor and a decoupling capacitor on the Vcc pin.
Eutech
I have been playing with these little thingies, Eua5202
made by Eutech. the sound is good, efficincy is really high and output at 4 ohms is 2 watt. they work on 3.7 volts, so one polymer cell will do the job.
http://www.alldatasheet.net/datasheet-pdf/pdf/219017/EUTECH/EUA5202QIR0.html
I have been playing with these little thingies, Eua5202
made by Eutech. the sound is good, efficincy is really high and output at 4 ohms is 2 watt. they work on 3.7 volts, so one polymer cell will do the job.
http://www.alldatasheet.net/datasheet-pdf/pdf/219017/EUTECH/EUA5202QIR0.html
- Status
- Not open for further replies.