Polk Audio

[aditya]

Drivers for mFonken or uFonken will need to be had from Madisound or from me for treated drivers.

MDF has been used in the past, a thicker panel material will be required to get teh same stiffness. A good multi-ply is better by at least a little bit. Our favorite sonics wise is bamboo plywood, but it makes for a harder & more expensive build. Of notre is that uFonken flat-paks are available and the same for 4 different milli-sized boxes including mFonken shouldn't be far behind. We think of this as a way to get people just the amount of BB that they need for these small projects (a single sheet is good for 4 sets of uFonken)

An externally hosted image should be here but it was not working when we last tested it.

hey guys i m goign to buy the following

Parts-Express.com: Peerless vline BC14WG79-08 5-1/4" Woofer | Peerless vifa BC14WG79-08 5" Woofer bass mid midbass mtm poly cone 2-way Tymphany vline

Parts-Express.com: Vifa D19TD-05 3/4" Poly Dome Tweeter | voice coil vifa tweeters vifa tweeter tweeters tweeter power dome tweeter coils COIL

thye fit in my budget preetyyy well.. now need help the box, can i use winisdbeta for size.. or not. else what cn i use, i m complete novice at speakers.

 

[Jim Shearer]

hey guys i m goign to buy the following

Parts-Express.com:*Peerless vline BC14WG79-08 5-1/4" Woofer | Peerless vifa BC14WG79-08 5" Woofer bass mid midbass mtm poly cone 2-way Tymphany vline

Parts-Express.com:*Vifa D19TD-05 3/4" Poly Dome Tweeter | voice coil vifa tweeters vifa tweeter tweeters tweeter power dome tweeter coils COIL

thye fit in my budget preetyyy well.. now need help the box, can i use winisdbeta for size.. or not. else what cn i use, i m complete novice at speakers.

Yes, you will need to use WinISD, other software, or book to calc the box size and (I assume) port. Then you have to figure out the XO. You can buy off the shelf XO's, but the probability of success with an off the shelf XO is rather low--it will work, just not very well..

Let us know how it works out!

Cheers, Jim