Perry Babin said:
Yes, it changes:
R262: 0.35V (load), 2.35V (no load)
R272 : 2.29V (load), 0.44V (no load)
i have a 1501 i am working on , anyone know what the cross is for the to-220 diodes (D444 and D445) in this are? the ones in this amp are by ON semi,
U1540
CQ412
no luck finding this on their site.
the legs are blown off D444 and D445, both had legs were loose in the board, as well as the other 2 , D446 and D447. I dont know which happened first cause C448 (3300uf,100v) cap is blown out as well.
U1540
CQ412
no luck finding this on their site.
the legs are blown off D444 and D445, both had legs were loose in the board, as well as the other 2 , D446 and D447. I dont know which happened first cause C448 (3300uf,100v) cap is blown out as well.
- Status
- Not open for further replies.