Can somebody please help me identify the type of plug shown in the attached pictures. The plug is used to connect various probes to the PicoTech data logger.
The blades are roughly 7.7mm apart and 0.83mm thick. Wide approximatly 2.4mm and 3.1mm.
Thanks!
N.
The blades are roughly 7.7mm apart and 0.83mm thick. Wide approximatly 2.4mm and 3.1mm.
Thanks!
N.
Attachments
It's used in thermocouples, that one is from Omega. Be sure to get the same kind to fit it, both
mechanically and electrically (the readings will be wrong otherwise). One example, not the correct one.
SMPW-CC Series | Miniature Size Thermocouple Connectors | Omega Engineering
mechanically and electrically (the readings will be wrong otherwise). One example, not the correct one.
SMPW-CC Series | Miniature Size Thermocouple Connectors | Omega Engineering
Last edited: