Does anyone have a schematic for this??
Or might be able to tell me the values of 2 components..
Theres is a diode that is defective board loaction D951 the markings are
02 and then a sideways 50 I believe its the reverse polarity diode since the unit doesnt turn on..
2nd board location is L583 i belive may be an inductor ? That part connects to the rca ground shield..
Any info would greatly be appericated
Or might be able to tell me the values of 2 components..
Theres is a diode that is defective board loaction D951 the markings are
02 and then a sideways 50 I believe its the reverse polarity diode since the unit doesnt turn on..
2nd board location is L583 i belive may be an inductor ? That part connects to the rca ground shield..
Any info would greatly be appericated
D951 is an RP diode and is not a critical component. Any of the 1N400x diodes will work.
The inductor can be replaced by a jumper wire for testing. LCTB2R2K2125 is the part number of the inductor. It's ~$5 at pacparts.
The inductor can be replaced by a jumper wire for testing. LCTB2R2K2125 is the part number of the inductor. It's ~$5 at pacparts.
- Status
- Not open for further replies.