Pico's Toxic Masculinity Class A Amp Chassis

[2 picoDumbs]

Price will be:
250 Euro for Chassis + Handles + Internally mounted Steel Plate for mounting components
241 Euro for Chassis + Handles

For payment and ordering, follow link

Ricerca - 1HFTOXIC

You can't place an order till after January 1st, 2021.

If you're purchasing the Cardas Back Panel then you need to order these parts:

CARDAS PARTS SUPPLIED BY SONICRAFT

Binding posts

Cardas CCGR S Binding Post, Sonic Craft

RCAs SHORT VERSION

Cardas GRFA S RCA, Sonic Craft


RCAs LONG VERSION

Cardas GRFA L RCA, Sonic Craft

XLRs

Cardas CM F XLR Chassis XLR, Sonic Craft[/QUOTE][/QUOTE]

Alternatively you could use Neutrik XLR jacks.


Shorting Pins For XLR's - OPTIONAL

Cardas CGSP, Sonic Craft

If you want to use other RCAs and Binding Posts then choose the back panel with pilot holes.
The XLR cutout is compatible with either Neutrik or Cardas this is common on both back panels

Chassis Specs

10mm thick Aluminium Front Panel - Anodized Black or Silver

Dimensions
450mm wide
500mm deep
165mm tall

Heatsinks 500mm x 165mm

Heatsinks will be drilled and tapped to be compatible with all Firstwatt amps in the store (UMS spec) as well as some additional holes that use more of the heatsink real estate, as well as add the option to mount longer pcbs etc.
Back panel is predrilled and cut to accept:
Schurter IEC
Neutrik or Cardas XLR
Pilot hole to drill out to RCA size of your choice - it is suggested to use Cardas
Pilot holes to drill out to binding post size of your choice - it is suggested to use Cardas
Holes installed for handles.

4U x 500mm Toxic Masculinity Chassis

So far the list is:

Blk Dynamite x 2
Savu x 2
Mr Dewk x 2
Pico x 1 (maybe 2 if required to get to 25)
Gary S x 1 (maybe 3 if price is reduced further)
pwagner x 2 (maybe 3 if price is reduced further)
Hey Bill x 1 (maybe 2 if required to get to 25)
Super_BQ x 1 (maybe 2 if required to get to 25)
Mirio x 1 (maybe 2 if required to get to 25)
Ozorfis x 1 (maybe 2 if required to get to 25)
TungstenAudio x 1 (maybe 2 if required to get to 25)
ItsAllInMyHead x 1 (maybe 2 if required to get to 25)
Gnub x 1
Subbu k x 1
hifibluedevil x 1
BrianGasberg x 1
Gerald1951 x1
Cakyol x 1
vvs07 x 1
6L6 x 1
Theodosis O. x 1
Dennis Hui x 1
Kasey197 x 1
Sampsonite x 1
Argos x 1
wg45 x 1
dantwomey x 1
32y0 x 1
Kbergsson x 1
Analogdiy x 1
ggetzoff x 1

 

[Morde]

Nice! Will it be with black or silver front panel? Is the price VAT excluded?

 

[2 picoDumbs]

I think there is scope to choose either a black or silver front panel.
Let me enquire.

The front panel is 10mm thick Aluminium.

I will enquire about VAT.

 

[2 picoDumbs]

Nice! Will it be with black or silver front panel? Is the price VAT excluded?

OK

Front panels can be either Silver or Anodized Black.

Price is exclusive of VAT, you will need to add 22% to that price plus shipping charges.

Outside of Europe it is my understanding that there is no requirement to pay VAT.

 

[Gianluca]

That's correct, you will only pay that price plus shipping charges if you live outside the European Union

 

[2 picoDumbs]

Nice! Will it be with black or silver front panel? Is the price VAT excluded?

Do you think you could be intetested?
We are very close.

 

[Morde]

It sure is a tempting offer and I’ll most probably regret this later, but I’m having too many projects now and am enjoying very much of my just finished F5X. So I’ll have to skip this one. I wish you luck with the GB!

 

[2 picoDumbs]

No worries Morde

 

[2 picoDumbs]

Order will be placed early January.

If you want to join the club then please place your interest before December 30.

 

[wg45]

Hi Pico- Please add me to the club for one chassis. Thanks.

 

[2 picoDumbs]

Hi Pico- Please add me to the club for one chassis. Thanks.

Done

 

[2 picoDumbs]

Please place interest by January 1, 2021

 

[2 picoDumbs]

Hi Pico- Please add me to the club for one chassis. Thanks.

Here is how to order and pay.
You can't place an order just yet but here is the link

Ricerca - 1HFTOXIC

To explain:
If you are just buying the chassis you should add these handles to the order
Maniglie tonde 3 unita cromate

The full kit includes handles and an internally mounted steel perforated plate which makes mounting pcbs etc to the bottom of the chassis easier

 

[2 picoDumbs]

Here is how to order and pay.
You can't place an order just yet but here is the link

Ricerca - 1HFTOXIC

To explain:
If you are just buying the chassis you should add these handles to the order
Maniglie tonde 3 unita cromate

The full kit includes handles and an internally mounted steel perforated plate which makes mounting pcbs etc to the bottom of the chassis easier

This has now been simplified so that the handles have been added to the Chassis Only order

 

[2 picoDumbs]

Hi Pico- Please add me to the club for one chassis. Thanks.

You can now place an order on the website.