Hello
greetings i am a newbie in the world of dac players i assembled a
rasberry Pi dac player with a cheap pi/fi dac card it works supply
is a 5 volt linear power supply L Adaptor software is volumio.
I want to add this waveshare 5 inch touch screen can anyone help
me with instructions please.
warm regards
Andrew😕
greetings i am a newbie in the world of dac players i assembled a
rasberry Pi dac player with a cheap pi/fi dac card it works supply
is a 5 volt linear power supply L Adaptor software is volumio.
I want to add this waveshare 5 inch touch screen can anyone help
me with instructions please.
warm regards
Andrew😕
Attachments
Have you installed the touchscreen plugin?
Have you appended
#### Waveshare 5" Touchscreen settings ####
hdmi_group=2
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
hdmi_drive=1
to your /boot/userconfig.txt file?
If you still have problems, you may get more help from
Volumio - A community of music lovers
Have you appended
#### Waveshare 5" Touchscreen settings ####
hdmi_group=2
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
hdmi_drive=1
to your /boot/userconfig.txt file?
If you still have problems, you may get more help from
Volumio - A community of music lovers
Last edited:
pi/fi with RASBERRY PI
Hello Yatsushiro
greetings i have not given up its full functional TOUCH
SCREEN works without internet also now i have to make
a cabinet to house it like the hi fi berry cabinet THANKS
for your valuable assistance.
warm regards
Andrew😉
Hello Yatsushiro
greetings i have not given up its full functional TOUCH
SCREEN works without internet also now i have to make
a cabinet to house it like the hi fi berry cabinet THANKS
for your valuable assistance.
warm regards
Andrew😉
Attachments
Volumio based Raspberry Pi Media Center - YouTube
Only remote control to be added and cabinet to be made like this
warm regards
Andrew
Only remote control to be added and cabinet to be made like this
warm regards
Andrew
Hello
greetings Please can anyone help me to add a remote control for the above
pi/fi dac card remote control sensor is on pcb.
warm regards
Andrew
file:///C:/Users/user/Desktop/Remote-Controlling-Your-Raspberry-Pi-Hi-Fi-Device.pdf
IS this ok
greetings Please can anyone help me to add a remote control for the above
pi/fi dac card remote control sensor is on pcb.
warm regards
Andrew
file:///C:/Users/user/Desktop/Remote-Controlling-Your-Raspberry-Pi-Hi-Fi-Device.pdf
IS this ok
Hirez pictures of your board suggest the IR receiver output is connected to GPIO26.
Perhaps this discussion Raspbian Buster and LIRC - Raspberry Pi Forums and lirc_rpi got replaced by gpio-ir and gpio-ir-tx, how do I upgrade? * Issue #2993 * raspberrypi/linux * GitHub is more relevant.
Perhaps this discussion Raspbian Buster and LIRC - Raspberry Pi Forums and lirc_rpi got replaced by gpio-ir and gpio-ir-tx, how do I upgrade? * Issue #2993 * raspberrypi/linux * GitHub is more relevant.
MyPIAmp Project # Volumio+RPI+DAC+IR Remote+LCD # - Diy Volumio Projects - Volumio
Still struggling😕😕😕
warm regards
Andrew
Still struggling😕😕😕
warm regards
Andrew
Attachments
- Home
- Source & Line
- Digital Line Level
- PI/FI with Rasberry/Pi