Hoffmeyer said:Some day I'll have to take the time to find out how to attach more pictures to one post
Hoffmeyer,
I don't think it will let you add more than one if you use the ATTACH FILE option. But if you have pics on a website already and use the IMG button at the top, you can add as many links to pics on your own website as you want. Which is what I did. Hope that helps.
Has everyone had a change to audition the tennis ball 6SN7s coming out of China?
that's a 6sn7? Is it a 20W version
Hashimotos
Here's my amp that I mentioned before with its brand new Hashimoto outputs! Initial indications suggest a mind blowing improvement in clarity and transparency! More evaluations to follow!
Here's my amp that I mentioned before with its brand new Hashimoto outputs! Initial indications suggest a mind blowing improvement in clarity and transparency! More evaluations to follow!
An externally hosted image should be here but it was not working when we last tested it.
Low voltage, all tube, guitar amplifier for headphones based on the 12u7 and 12K5.
More at http://www.ecp.cc/mini_guitar_amp.html
An externally hosted image should be here but it was not working when we last tested it.
More at http://www.ecp.cc/mini_guitar_amp.html
Cycline3 said:Rodango,
That amp looks awesome! Great job... hope it sounds as great as it looks!
-Sean
Thanks! Yes it sounds utterly awesome with GEC CV-1067 input tubes. Also the cocobolo side panels came in today so I'll need to take another photo when I get them on...
Bluto said:Rodango -
That Amp is near a Masterpiece. It terrifies me to see it sitting where you have it... one good bump by someone not looking or a little kid running by.
Bluto
I have been thinking the same thing and what isn't seen is how precariously perched it is on those pieces of oak. I need to get it its own (strong) table. At about 100#, it wouldn't do the floor much good either. No kids around (whew..)
I'd put it on top of the cabinet to its left but then it gets in the way of the video projection for my home theater. Plus the cabinet makes these large cracking sounds when I put it up there.
That cocobolo looks great! And as I said before, I have four other tube amps and this one is the absolute best and the best I have ever heard.
An externally hosted image should be here but it was not working when we last tested it.
Excuse the awful camera phone photo (my colleage borrowed my 17-50 f2.8!!) but this is almost at mount-everything stage!
That grey stuff will peel off to reveal (hopefully!!!!) brushed alu.
Wood has to be sanded and stained too.
I'll upload the few from my SLR when I'm done the whole thing, including my odd method of cooling the first filter resistor
Mr. Triatic said:My newest EL84 Single end in triode mode rolled off the productionline (my kitchentable..) just a week ago, and i'm still stunned by the sound of it
Is this the schematic on your site? (EL84 driven with ECC81)
Looks great!
->alexg
No, not really but almost, this is a ecc83 driven el84 SE, very much like this one:
http://www.jogis-roehrenbude.de/Leserbriefe/Goecking-EL84SE/Goecking.htm
Very very good sounding construction, and even better with some modifications ;-)
Soon i will update my homepage with new and/or modified projects.
No, not really but almost, this is a ecc83 driven el84 SE, very much like this one:
http://www.jogis-roehrenbude.de/Leserbriefe/Goecking-EL84SE/Goecking.htm
Very very good sounding construction, and even better with some modifications ;-)
Soon i will update my homepage with new and/or modified projects.
99% assembled! I was in a rush to get out this morning, so I ddn't take any pics of it fully assembled. Those improvised OPT covers...!! My actual ones are somewhere floating around the Irish postal system
http://www.flickr.com/photos/psychobiker/sets/72157604051618142/
L
http://www.flickr.com/photos/psychobiker/sets/72157604051618142/
L
- Home
- Amplifiers
- Tubes / Valves
- Photo Gallery