It should use a different one. I can ask Scott.
In our miniOnken the A12pw needs a box about 2x as big. It goes quite a bit lower.
I do have an unpublished ML-TL from Scott for the A12pw… it is part of the A12x plan set.
dave
In our miniOnken the A12pw needs a box about 2x as big. It goes quite a bit lower.
I do have an unpublished ML-TL from Scott for the A12pw… it is part of the A12x plan set.
dave
Keeping in mind that the 12PW intended for use as woofer, and needs a mid/ tweeter- fortunately there's no shortage of candidates there- such as A5.2, A6, A7.3/P, CHS70 from Mark's own stable😉
And while not the tiniest of builds, I'm pretty sure our MTM with dual 12PW is smaller than either of the 12P Pensil designs
And while not the tiniest of builds, I'm pretty sure our MTM with dual 12PW is smaller than either of the 12P Pensil designs
Last edited:
Got word back from Scott. A proper pencil for the A12pw would be about 6 ½' tall so he didn't do one.
dave
dave
- Status
- Not open for further replies.