Peavey SP115M crossover schematic needed for CL1

[magnatar]

Blew the CL1 and B1 bulb on the crossover board. Does anyone have a schematic or know what the value of the small 1/4"W X 1/4"H by 1/16" thick round disc.

Assume its in the pico farads, Peavey doesn't have schematic or know the value of the cap. If I knew its value, I'd have it fixed ASAP.

Found parts list for all Peavey and the units for the pf caps are in the range of 150 to 180pf, but I would like to know for sure before I proceed.

Here are the pics for the unit



Thx in advance

Mag

 

[Brett]

Caps will be uF.

Try calling Peavey, I've found their CS and spares to be very good.

 

[magnatar]

Found out that the CL1 is NOT a capacitor , but a Varistor 60V, 1/2 amp


Mag

 

[magnatar]

The part # from Peavey for the CL1/varistor is;

#70250204 Price $1.59, Min order $5.00

tech specs

60V 1/2 amp
Positive temp coff
hold current .3 amp
trip current .6 amp
Max current 40 amps

 

[Nihilist]

RXEF030 Tyco Electronics / Raychem PTC Resettable Fuses

I know it's an old thread , but I had the same problem and found the parts way cheaper here.


......................Blake

 

[Vitiko]

Hi
RXE030 is correct spare name for CL1
I don't know what is the difference from RXEF030, but in schematic - RXE030