Peavey cs800 schematic

[aits]

Hello from Estonia! I need the amplifer "peavey cs800) schematic.
If you find and send me I can send for you anyothers schematic or ...
Best regards,
aits.

 

[Netlist]

Hi aits,
Do you want the old or the new model?

/Hugo

 

[dangus]

I have a CS800 schematic dated 1990, which seems to cover amps built with boards dated between 1986 to 1989.

 

[Netlist]

This I call the old model:
http://www.unclewhiskeybreath.com/cs800.jpg

and this the new:
http://www.partysound4you.de/equipment/equipment_images/peavey cs800.jpg

An 800x version is released later and is capable of driving 2 ohm loads.

There is also the newest and would be the CS800s.
http://www.kodachrome.org/salt/cs800s.gif

/Hugo 🙂

 

[Enzo]

There are two basic versions. There are variations of the older one also. The newer one has the wind tunnel - a large grilled opening on the front for air - and LED meters. And the newer version is available with either a linear power supply, or in the switching power supply version.

Peavey is one of the most customer friendly companies I have ever done business with. If you email parts@peavey.com they should send back your drawings if the ones above are not what you need. Include the serial number of your amp to make sure they get the right drawing.

Also, if you need specific assistance in the repair, you can talk with one of their service engineers on the factory repair forum at www.peavey.com

 

[RyanW]

Netlist,

I am looking for a copy of the old CS800 schematic. Do you still have it on file? The amp I have is very old and the volume control is labelled 1 thru 10 (as opposed to the dB scale).

 

[mnow]

CS800 schem

RyanW,

I have the older 800 schems if you still need them

 

[Netlist]

Netlist,

I am looking for a copy of the old CS800 schematic. Do you still have it on file? The amp I have is very old and the volume control is labelled 1 thru 10 (as opposed to the dB scale).

I have it but with a volume control from 1 thru 12. 😉
Keep an eye on your mailbox.

/Hugo

 

[BrianPihl]

CS-800 schematic

I have it but with a volume control from 1 thru 12. 😉
Keep an eye on your mailbox.

/Hugo

Do you still have this file? i could realy need it.

 

[mnow]

Peavey CS800A schematic

Please goto http://webpages.charter.net/eastwind_engineering/CS800-2.jpg
Here is the schem for the Peavey CS800 version A.
Hope it helps.