Folks:
Is it reasonable to combine the Pearl/Ono boards in the same chassis as an Aleph P 1.7 and Dantimax remote control system? How much isolation do the Pearl/Ono boards need? All of the power supplies can be located in a second enclosure. Otherwise, I'll need three enclosures and that seems a little overboard.
Any recommendations would be appreciated.
Regards,
Scott
Is it reasonable to combine the Pearl/Ono boards in the same chassis as an Aleph P 1.7 and Dantimax remote control system? How much isolation do the Pearl/Ono boards need? All of the power supplies can be located in a second enclosure. Otherwise, I'll need three enclosures and that seems a little overboard.
Any recommendations would be appreciated.
Regards,
Scott
I will post my Pearl project using Promitheus great PCB's at: http://www.diyaudio.com/forums/showthread.php?s=&threadid=103324
Marsel,
if you missed the GB, why not make a set of boards yourself ?
For a home fabrication 2-layer pcb, the PearlP layout is easy.
When you have boards i can help you with the transistors.
Even with the best foil caps ever made for the RIAA, if you desire the ultimate Pearl Phono.
if you missed the GB, why not make a set of boards yourself ?
For a home fabrication 2-layer pcb, the PearlP layout is easy.
When you have boards i can help you with the transistors.
Even with the best foil caps ever made for the RIAA, if you desire the ultimate Pearl Phono.
Well this is ALWAYS an option.
I left that as my last resort.
You're right it's not a problem. But imagine homemade board with rikens and blackgates
I would be very grateful for the transistors.
I want to buy them regardless the boards issue.
Please contact me via mail if your offer is still valid
I left that as my last resort.
You're right it's not a problem. But imagine homemade board with rikens and blackgates
I would be very grateful for the transistors.
I want to buy them regardless the boards issue.
Please contact me via mail if your offer is still valid
Hello,
I still have boards for Pass Pearl . The pair (Stereo) costs 26.00 euros plus dispatch.
Regards
sonix
I still have boards for Pass Pearl . The pair (Stereo) costs 26.00 euros plus dispatch.
An externally hosted image should be here but it was not working when we last tested it.
Regards
sonix
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Pearl phono PCBs Group Buy