Pearl 3 SMD

[Toys4Boys]

Getting back to my P3 after a lengthy hiatus, had a few SMD 0805 to do, working with new tweezers managed to lose 2 !!!! On the plus side the 2 that I did today are quite a bit better than the first 4.

 

[Toys4Boys]

Getting ready to order, thinking 10 will be a long time supply?

 

[Zen Mod]

1000

 

[Toys4Boys]

Yes, 1000 would be more than a lifetime! The question really is, are these parts that are likely to be used in other designs?

 

[Zen Mod]

besides size, you didn't tell - which parts?

anyhow, if you take 1000, you can loose more

 

[Toys4Boys]

I'm looking at the BOM and its right there.... under Lead Spacing, D'Oh . 1uF

 

[Zen Mod]

BOMs are for Sissies

Every Sissie needs to make his own BOM, from schematic and parts placement printed in 100%

 

[vanofmonks]

making BOM, from schematic and parts placement printed in 100% is for Sissies

Every Sissie needs to memorize the schematic and parts size and order each part individually from memory.

 

[birdbox]

You lost some smd capacitors......I can find my entire Pearl 3 kit. Where did I put that thing.....?

 

[jackinnj]

If you're going to make an SMD P3 I would "heartily" suggest some 0805 ferrite beads on the gate of each '209

The government issue 7815/7915 are fine ... but you can do better.