The ones I have are prototypes before they went to market. They have a bass optimization circuit that has a bypass switch.
When you buy a new one, they give you a chart of the resistors to change if you wish to tailor the boost.
I am not familiar with a 30Hz highpass. Perhaps somone else is in the know.
When you buy a new one, they give you a chart of the resistors to change if you wish to tailor the boost.
I am not familiar with a 30Hz highpass. Perhaps somone else is in the know.
I just recently bought another PE bash amp over the holidays and noticed the new amp was a little different. They may have changed the resisters to something more appropriate for the amps usage, but the older ones did indeed have the 30hz filter. Ill take a look at the new amp to see if they did change the resister values. Either way its an easy change.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- PE BASH 500W Plate Amp