I been reviewing the datasheet for the PCM2707/PCM2606 and wanted to confirm the following:
a. If I only need I2S out can pins 26 to pin 31 be left floating?
b. SSPND (pin 11) be left floating if play, next track, mute, vol+ and vol- are not needed?
cheers,
Brent
a. If I only need I2S out can pins 26 to pin 31 be left floating?
b. SSPND (pin 11) be left floating if play, next track, mute, vol+ and vol- are not needed?
cheers,
Brent
bacworth said:
to a.
I would connect at least the GND pins ! rest can be left open
to b.
can be left open.
do NOT forget to hold pin 9 low (gnd)
doede
- Status
- Not open for further replies.