PCM1704 - Gerber file assistance

[lordearl]

I've got a local PCB manufacturer who has said they will assist me in fabricating a board for this circuit:

DAC with two PCM1704

I've attached the schematic but the eagle BRD files can't be attached for some reason. They are here.. Is anyone able to assist in generating a Gerber file? I've never used eagle and don't know whether I will get the groundplanes etc done properly.

 

[Avro Arrow]

I'll have a look

 

[pinkmouse]

Advanced Circuits have a very good free file checking tool. It's part of my PCB pipeline even if I don't use them for production.

 

[lordearl]

I'v received a response from the PCB manufacturer & attached their PCB document file (PDF).

Here's what they had to say:

For PCM1704 DAC,
1. Here attached PDF generated from the BRD file in eagle version 5.6, please check if it is ok? Especially for the silkscreen and if any copper plane missing on copper layers.
2. Is there any groundplane missing on the copper layers? And what's version of eagle software used for this design?

Does this help at all? The file does appear to be very similar to, if not the same as, the board pictured on Pavouk's site.

 

[Avro Arrow]

Those look OK

Here is the Gerber I generated as well.

Good luck!

 

[lordearl]

Thanks Avro - very generous of you!