I have a few PCBs to build an active 2-way crossover (4th order, Linkwitz transform in both LP and HP sections).
The schematic of the circuit and the PCBs are shown in the photos below.
The cost is 19 Euros for one PCB (shipping is included). For 2 pcbs, the cost is 33 Euros (shipping is included).
I will provide also the PCB assembly guide.
If you are interested send me a Private Message.
The schematic of the circuit and the PCBs are shown in the photos below.
The cost is 19 Euros for one PCB (shipping is included). For 2 pcbs, the cost is 33 Euros (shipping is included).
I will provide also the PCB assembly guide.
If you are interested send me a Private Message.
Attachments
You will need to know the acoustic response of each driver and then to calculate the values of the Linkwitz transform circuits around IC3A and IC4B to equalize them.
If you don't want to use the Linkwitz transform circuits you will have to cut a couple of tracks on the PCB and modify the circuit.
Maybe I could help if you are interested.
If you don't want to use the Linkwitz transform circuits you will have to cut a couple of tracks on the PCB and modify the circuit.
Maybe I could help if you are interested.
i would only need 1, im planning on making an easy weight n treble dub preamp, grpahic eq leading to 2way xover control with kills leading to a summing mixer with mic/line input
send/rtn on the treble output going to the summing mixer! if u can help me more would be appreciated
send/rtn on the treble output going to the summing mixer! if u can help me more would be appreciated