Pass Labs D1

[P. Lambda]

Please send me a copy too. Thanks.

 

[ktvktv]

Please send me a copy too. Thanks.

Please send me a copy too. Thanks!!!!!

shktv@163.com

 

[PierreG]

I'm really interested to have this service manual.
Thanks in advance.

Audio_limit@hotmail.com

 

[P. Lambda]

Forgot to give email -- please email to paul_lambda at yahoo.com
Thanks.

 

[HC]

If you don't mind, I would like to have a copy too please. Thanks.

Henry

ir_hcheung(at)yahoo.com.hk

 

[Nexus]

Hello,

and I would like a copy too.

Thank you in advance.
Nexus

 

[Nexus]

Sorry,

use the adress via this forum.


Thanks.

 

[nicoch58]

please send a copy emanuele.assistenza_at_regione.marche.it

thanks!

 

[hc167]

please send me a copy too. thank you.

 

[MJPAudio]

Mail me and i send a copy of the manual

 

[Valeriano]

me too 🙂
thanks!

ciao
.vale.

 

[bou]

I would also like to have it.

hibou23 (at) gmail (dot) com

Thank you
Bou

 

[LTK]

I would like it too please🙂 multibit (at) ntlworld (dot) com

Thank you!

Can the D1 be used with a PCM1794 and be set to line out ?
The PCM1794 has +/- outputs

 

[cviller]

Can the D1 be used with a PCM1794 and be set to line out ?
The PCM1794 has +/- outputs

As far as I recall, pcm1794 has twice the output current needed, so you'll have to scale down the gain in order to avoid clipping. But it should be easily done. 😉

 

[tjdd]

Please send me a copy too. Thanks

lai.mu57@msa.hinet.net

 

[LTK]

As far as I recall, pcm1794 has twice the output current needed, so you'll have to scale down the gain in order to avoid clipping. But it should be easily done. 😉

Thanks Cviller🙂 I've been searching around trying to find some info how to use it with a dac that has +/- outputs , if I had a balanced pre etc I'd just build a pair of D1's, balanced in balanced out but I need line out.

I presume theres some instructions in the manual how to connect it up to various dacs?

 

[cviller]

Thanks Cviller🙂 I've been searching around trying to find some info how to use it with a dac that has +/- outputs , if I had a balanced pre etc I'd just build a pair of D1's, balanced in balanced out but I need line out.

I presume theres some instructions in the manual how to connect it up to various dacs?

You won't find much instruction in the manual, but d1 is balanced anyways. You make 4 identical iv stages and use two for each channel. I have single ended preamp, so I just take the signal between + and gnd on the output of the iv stages. A bit of a waste really, but I'm planning on building another preamp to match my F4... 😀

 

[LTK]

You won't find much instruction in the manual, but d1 is balanced anyways. You make 4 identical iv stages and use two for each channel. I have single ended preamp, so I just take the signal between + and gnd on the output of the iv stages. A bit of a waste really, but I'm planning on building another preamp to match my F4... 😀

Ok thanks, I was hoping to be able to use just a pair of the D1's mainly to keep things compact with the PCM1794 dac, oh well🙂

 

[matejS]

Hi,

could you please mail me D1 service manual as well... to mattityahu (a_t_) gmail (_d_ot) com

Thank you,
Matej

 

[Manu]

You won't find much instruction in the manual, but d1 is balanced anyways. You make 4 identical iv stages and use two for each channel. I have single ended preamp, so I just take the signal between + and gnd on the output of the iv stages. A bit of a waste really, but I'm planning on building another preamp to match my F4... 😀

Hi cviller,
Did you build the D1?


🙂

manuel