OK, folks, I have set up a Wiki for those who are interested to get some pcbs, so that we understand demand and quantity and costs of boards better:
http://www.diyaudio.com/wiki/index.php?page=MOX+
I would like to encourage you to signal your demand for the boards, so that we understand better about what business we are talking. As a couple of questions are still open (final board design, who will actually manage the distribution and money collecting etc), this is not an order yet, so don't ask for price etc, just help to understand the demand.
Best Regards
http://www.diyaudio.com/wiki/index.php?page=MOX+
I would like to encourage you to signal your demand for the boards, so that we understand better about what business we are talking. As a couple of questions are still open (final board design, who will actually manage the distribution and money collecting etc), this is not an order yet, so don't ask for price etc, just help to understand the demand.
Best Regards
Sandy H. said:
That's nothing. In our previous house, we shared the property
with 5,000 chickens. Since we were upwind, it was a very
pleasant experience.
As i understand this, its all 2 way x-overs.
Would it be cxomplicated to make it 4way?
Forgive my ignorance, but could you simply run 2 times 2way in paralel?
Magura🙂
Would it be cxomplicated to make it 4way?
Forgive my ignorance, but could you simply run 2 times 2way in paralel?
Magura🙂
You can give each driver its own separate bandpass filter
and feed all these filters with the same circuit, or you can
"fan" them out, as in the sample of a 4 way, where the
signal goes to the midband hi pass/low pass, and each of
those in turn drives another hi pass/low pass. With four XVR1's
(which is a 2 way) I can get filters for 5 drivers.
MuuuuHahahahahah......
and feed all these filters with the same circuit, or you can
"fan" them out, as in the sample of a 4 way, where the
signal goes to the midband hi pass/low pass, and each of
those in turn drives another hi pass/low pass. With four XVR1's
(which is a 2 way) I can get filters for 5 drivers.
MuuuuHahahahahah......
When practical, I choose the first option--dedicated filters for each driver. There's less circuitry in the signal path, not to mention fewer cables. In fact, my current task is to put the line stage and crossover into the same chassis. Simpler still. Eventually the phono stage will end up in there, too. No, I'm not headed for an integrated amp, just the low-level stuff.
On the other hand, if I had easy access to a half-dozen crossovers, temptation might overwhelm me...
Grey
On the other hand, if I had easy access to a half-dozen crossovers, temptation might overwhelm me...
Grey
avatar
Magura: who is this person on your Avatar? Its driving me crazy. The thumbnail photo is too small to see if it is MM, or some other Hollywood type. I cannot concentrate on the verbiage in these posts with that woman lounging seductively nearby like that. I'll need to attach a heatsink to myself or something!!! Please advise.
Larry Wright
Seattle area
Magura: who is this person on your Avatar? Its driving me crazy. The thumbnail photo is too small to see if it is MM, or some other Hollywood type. I cannot concentrate on the verbiage in these posts with that woman lounging seductively nearby like that. I'll need to attach a heatsink to myself or something!!! Please advise.
Larry Wright
Seattle area
It's Marilyn Monroe. I won't say that I'm immune to her, but I prefer brunettes. Still, it's better than some oddball abstract art.
Grey
Grey
GRollins said:
In that case may i recommend the brunette substitute...Norma Jean 😉
Monroe is though the ref. model of women.
Magura
- Status
- Not open for further replies.