I have 8 sets of PCB's made by PCBway using files from Nelson Pass.
$10 each or $15 for a pair.
Shipping in USA is only $7.20 via USPS Priority mail
Shipping overseas isn't worth it considering shipping could be 2 - 4 times PCB's price.
$10 each or $15 for a pair.
Shipping in USA is only $7.20 via USPS Priority mail
Shipping overseas isn't worth it considering shipping could be 2 - 4 times PCB's price.
Attachments
@rajesh - the pdf is on the PassDIY website and the components are nothing uncommon. Capacitors, resistors, a few zener diodes and IRF610 and 9610 mosfets.
PassDiy
It's an unfortunate trend in DIY that people forget the circuits of the past and only build the most recent designs while the commercial preamps from 20 years ago still regularly sell for hundreds or thousands of dollars on the used market.
If you get the chance to build this one you will not think it sounds bad. It is class A and designed by Nelson Pass after all. The best part is there are no expensive or difficult to source parts in this one.
PassDiy
It's an unfortunate trend in DIY that people forget the circuits of the past and only build the most recent designs while the commercial preamps from 20 years ago still regularly sell for hundreds or thousands of dollars on the used market.
If you get the chance to build this one you will not think it sounds bad. It is class A and designed by Nelson Pass after all. The best part is there are no expensive or difficult to source parts in this one.
I am sold out of power supply boards, I have 1 (one) Line Stage PC board for $10 plus $7.90 in USPS Priority Mail (USPS raised prices this month).
Hi Elwood -- I'll take that last Line Stage board for $10 + $7.90. PM coming.
Thanks
Phil
Thanks for the heads up.@rajesh - the pdf is on the PassDIY website and the components are nothing uncommon. Capacitors, resistors, a few zener diodes and IRF610 and 9610 mosfets.
PassDiy
I heard lot of good words about it. My curiosity made me ask the noob question. Too bad, looks like they're all gone.If you get the chance to build this one you will not think it sounds bad. It is class A and designed by Nelson Pass after all. The best part is there are no expensive or difficult to source parts in this one.
I still have two Line Stage boards available. I was going to keep one for a spare, the preamp works so well I've decided not to keep it. Price is $10 for each board and $7.95 for shipping via USPS Priority mail.
PM me for PayPal payment info.
PM me for PayPal payment info.
Attachments
I'm using a linear 10K four ganged 24 step pot using Vishay Dale resistors and a Log 5K four ganged pot using Vishay Dale resistors.
I bought a blank 4 ganged pot which I plan on making a linear 5K pot, once again using Vishay Dale resistors. Not looking forward to that project, 96 resistors to solder to a plastic ganged stepped pot. This is why engineers create machines, so that people don't have to do work like this.
I bought a blank 4 ganged pot which I plan on making a linear 5K pot, once again using Vishay Dale resistors. Not looking forward to that project, 96 resistors to solder to a plastic ganged stepped pot. This is why engineers create machines, so that people don't have to do work like this.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.