Hi guys, how it's going.
I have a pascal S-pro2 module that is on temp protection mode (even cold), so...
I've seen all manuals but don't know exactly how it measures the temperature.
Does anybody have an idea?
Greetings!!
I have a pascal S-pro2 module that is on temp protection mode (even cold), so...
I've seen all manuals but don't know exactly how it measures the temperature.
Does anybody have an idea?
Greetings!!
Thanks Aliarifat.
Voltages seems to be at the correct range (Even auxilary smps) but on the pinout, the temp measures 3.2v that manual says that the amplifier or the smps is around 100 degrees. Pin nº 6
As it detect temp protection is enable, it puts the module on mute and standby (both giving me 3.2v). Pins 13 & 16.
So i would like to know how it measures the temp... Maybe an IC, resistor?...
Amp and smps transistors are okey... and is not reading any voltage on the PROTECT pin.
Thanks in advance!
Voltages seems to be at the correct range (Even auxilary smps) but on the pinout, the temp measures 3.2v that manual says that the amplifier or the smps is around 100 degrees. Pin nº 6
As it detect temp protection is enable, it puts the module on mute and standby (both giving me 3.2v). Pins 13 & 16.
So i would like to know how it measures the temp... Maybe an IC, resistor?...
Amp and smps transistors are okey... and is not reading any voltage on the PROTECT pin.
Thanks in advance!