Parts Question

[S Merlington]

Ive been ordering chokes from Digikey and they no longer stock them the first link is what ive been ordering

Wondering if the ones in the 2nd link will work as well ??

Or will the ones in the 3rd link work better ?


http://media.digikey.com/pdf/Data%20Sheets/Bourns%20PDFs/79f_series.pdf


http://www.bourns.com/data/global/pdfs/8230_series.pdf

http://www.bourns.com/data/global/pdfs/78f_series.pdf


Also will theese work as a sub for the D1302's

http://www.digikey.com/product-detail/en/KSD5041RTA/KSD5041RTAFSCT-ND/3478163

 

[kds9591]

Ive been ordering chokes from Digikey and they no longer stock them the first link is what ive been ordering

Wondering if the ones in the 2nd link will work as well ??

Or will the ones in the 3rd link work better ?


http://media.digikey.com/pdf/Data%20Sheets/Bourns%20PDFs/79f_series.pdf


http://www.bourns.com/data/global/pdfs/8230_series.pdf

http://www.bourns.com/data/global/pdfs/78f_series.pdf


Also will theese work as a sub for the D1302's

KSD5041RTA Fairchild Semiconductor | KSD5041RTAFSCT-ND | DigiKey

You didn't state the value of the inductor you need for the inductors listed in the first link but Newark | US - Electronic Components Distributor | Electronic Parts Distributor carries that line of inductors. Here's a link of one value below.

79FR10M-TR-RC - BOURNS - INDUCTOR, 100NH, ±20%, 300MHZ | Newark

 

[Perry Babin]

As long as the value is the same, the current rating is equal or greater than the ones that you know to be a good sub and the leads fit in the holes, it will work. The ones you listed were a bit longer so they may have to stand on-end.