from ZM "buy ..... naah - don't buy , but make RS-A1"
had a RS-A1 in another life. Beautiful arm - let a dear friend "borrow" it
had a RS-A1 in another life. Beautiful arm - let a dear friend "borrow" it
It's definitely interesting in comparison to J2 bastardo. Transformers just get the who l e "space" thing so right. Not listened much. Funny^6 is still t 🙂 e heavyweight.
I'm contemplating of best place , to buy 7 killos of CuL wire , for two sets of Tann xovers ........
In fact ...... not where ....... just soon 😉
In fact ...... not where ....... just soon 😉
I just like that powering up behavior , with signal on ......... from all KLUNK! , to medium KLUNK! .......... to no KLUNK!
though , like all Papamps , it's really alive only when properly hot
though , like all Papamps , it's really alive only when properly hot
It threw me at first. Had it powered up and could not figure out why it wouldn't bias up. The slow blade pierces the shield.
Would a LC PSU work with this amp?
I have 2 800VA 2x30V secondaries transformers, 4 3.9 mH inductors and necessary caps. I think this would give approximately 30(.9) - 2V losses = 25V.
Also have a 800VA 4x20V secondaries transformer that I could use to get about 25V in a CLC with same inductors.
Thanks
Bob
I have 2 800VA 2x30V secondaries transformers, 4 3.9 mH inductors and necessary caps. I think this would give approximately 30(.9) - 2V losses = 25V.
Also have a 800VA 4x20V secondaries transformer that I could use to get about 25V in a CLC with same inductors.
Thanks
Bob
- Status
- Not open for further replies.