Hi.
I am working with an orion hcca 5000. it is the first time that I work with this brand and the ESP protection system. This amplifier when connecting remotely, only lights the POWER led and 3 pulses the ESP led and remains fixed. there is no consumption at startup. There is no source pulse when connecting remotely, nor does it raise the rail voltage. Can someone guide me?
I am working with an orion hcca 5000. it is the first time that I work with this brand and the ESP protection system. This amplifier when connecting remotely, only lights the POWER led and 3 pulses the ESP led and remains fixed. there is no consumption at startup. There is no source pulse when connecting remotely, nor does it raise the rail voltage. Can someone guide me?
Attachments
Last edited:
Search the forum for the orion ESP problems.
What does the owner's manual say about the LED code?
What does the owner's manual say about the LED code?
I have reviewed the entire forum and user manual and have not come to any conclusions. I have also raised the protection diode d229 but without results. I have removed power from the 5v regulator of the pic and now the esp led does not light (it is logical) but the green power does, but I still have no pulse in the power supply ...
Someone else may be able to help. I saw only a few of these and if there was an issue where I was fighting the ESP, it was returned to the owner and I recommended that they send it to the manufacturer for repair.