Anyone have a high res picture of the circuit board ?
Someone recapped these amps and did some repairs and both amps draw excessive current now .
Wanna make sure the caps are in the right way
Someone recapped these amps and did some repairs and both amps draw excessive current now .
Wanna make sure the caps are in the right way
Ok the 3300uf cap was installed backwards .
Next problem I’m having is the amp will not power up .
any ideas on what to check ?
Next problem I’m having is the amp will not power up .
any ideas on what to check ?
I think I ha e a bad solder connection somewhere .
If I push on then airs it will power up for a second then go dead I’m gonna check the solder connections and post back
If I push on then airs it will power up for a second then go dead I’m gonna check the solder connections and post back