I did some experimenting with the 19V Mofo versions of these amps and enjoyed them for the last 6 months. I saved some boards to try out some 24V versions in the future but need to sell these to fund other projects. I also have a Pass Front end to sell with one of the Mofo pairs.
- First amp is mono blocks in a single chassis with Wima caps, matte silver painted faceplate, Peruvian walnut bottom, and heatsinks cut to size and mounted together. 19V Dell Power supplies included. I used Hammond 193T chokes. - SOLD!
- Second is a pair built on separate Peruvian Walnut Wood planks. Only difference are the boards, the heatsinks are a tad bigger and run a few degrees cooler, and the caps are Solen. Asking $250 and help to ship
- The Front End I built into a Hammond chassis. It has an Alps Blue RK27 10k pot, silver Mil spec wire, Mark Johnson's SMPS filter, Nichicon BP caps on the input and Wima caps on the output. Powering it is a 48V Meanwell SMPS and it is set at 20db to run the Mofos - SOLD!
I am also open to trades for DIYAudio parts, boards, kits, etc to experiment with.
- First amp is mono blocks in a single chassis with Wima caps, matte silver painted faceplate, Peruvian walnut bottom, and heatsinks cut to size and mounted together. 19V Dell Power supplies included. I used Hammond 193T chokes. - SOLD!
- Second is a pair built on separate Peruvian Walnut Wood planks. Only difference are the boards, the heatsinks are a tad bigger and run a few degrees cooler, and the caps are Solen. Asking $250 and help to ship
- The Front End I built into a Hammond chassis. It has an Alps Blue RK27 10k pot, silver Mil spec wire, Mark Johnson's SMPS filter, Nichicon BP caps on the input and Wima caps on the output. Powering it is a 48V Meanwell SMPS and it is set at 20db to run the Mofos - SOLD!
I am also open to trades for DIYAudio parts, boards, kits, etc to experiment with.
Last edited:
